From: 24 April 2018
To: 25 April 2018
Same as for the IQRF Summit 2017, you can find more information on the web https://www.iqrf.org/summit2018/#media, where you'll find videos of the presenting companies with a lot of interesting information.
In this year, you can look forward to new standardized interoperable products that you can use for your long-term intents in the field of Internet things. There will be also a practical workshop, the announcement of the results of the IQRF Wireless Challenge IV contest and an informal meeting of the participants.
Currently, the web of the Summit is continuously filled with information about presenting companies, speakers, and topics. Below we focus on those already registered. Do not forget to watch the Summit site for news.
IQRF Tech (www.iqrf.com)
In the summer of 2017, IQRF Tech was founded, the MICRORISC's spin-off, to take over all activities related to research, development, and sales of IQRF technology.
The solutions demonstrated at the Summit are based on this technology. It is an important representative of wireless mesh networks operating in the ISM band designed to transfer small data from a device or to control them. These are extremely low-power networks, allowing battery operation for many years. Worldwide, hundreds of thousands of devices are now installed, which are controlled by this Czech technology. The IQRF OS 4.0 operating system incorporates security mechanisms based on the AES-128 standard, including secure adding of network devices and secure data transfer.
AAEON Europe (www.aaeon.com)
This company is the gateway provider in the IQRF ecosystem. From any gateway, you can easily create an IQRF Gateway by adding a USB IQRF transceiver and running an IQRF Daemon. This software was created for the IoT Starter Kit – pilot product (www.iqrf.shop) which, among other things, can be used to test your solution. The installation is simplified and well documented. You can also connect other external hardware such as sensors or active components to this kit.
One of the providers of quality sensors of internal air pollution is Protronix company. One of the first who successfully completed the certification process of interoperability of its IQRF devices, which is ensured by complying with standardized control commands. Sensors of CO2, temperature, relative humidity or other environmental pollutants in buildings can be found at http://www.iqrf.shop where you can purchase samples.
CTI Software (www.cti.cz)
This company develops intelligent systems and services to inform users about the current state of the environment or the crisis situation based on acquired sensor data. Their phone and notification services are used today by rescuers or dispatchings who receive warnings in dangerous situations as well as owners of large plots of land (forests including) when unauthorized manipulation of property occurs. Alarms are reported to users via an automated phone call or via SMS. Phone services also include the complete operation of the call center. CTI Software also has control and monitoring software for public and industrial lighting.
Master Internet (www.master.cz)
If you need a reliable storage, you can use Master Internet Services. They offer huge datacenters, servers, and cloud solutions. Clients get a professional solution without having to take care of it all by themselves. In addition to the high-performance data center, the company offers smartphone applications with Android and iOS operating system. Among them, you can also download an IQRF mesh management application.
JoTio, a young ambitious start-up, showed at a previous summit that they excellently deal with the integration of various systems used in an IoT project. If you need help with technical development or visualizing the collected data in graphs, the founders of this company can help you set up the necessary software. They use Node-RED as their favorite platform and provide training of it on demand.
If you need to control your Internet IQRF gateways in remote locations, you can use the RehiveTech remote management system that responds flexibly to customer requirements and has many useful functionalities thanks to constant innovation. At the Summit, you can meet main system developers and discuss the appropriateness of deploying this software on your gateways.
Also at this IQRF Summit, it will be possible to practice with interoperable products. To do this, a workshop will be organized, led by industry experts who either deliver end products or deal with providing and setting up the necessary services. You can try to build the entire IoT solution consisting of an IQRF network, sensors, and actuators, with data management and visualization.
IQRF Wireless Challenge IV
To enable close contact between the academic and professional community, we decided to organize the final round of the traditional developer contest here at the IQRF Summit 2018. The best projects will be presented by authors to the professional jury and the winning project will be presented on the main stage to a wide public.
We traditionally organize also a social event that allows informal meetings of all participants. People there can discuss common topics and share ideas. Experience shows how beneficial this type of event is, and how it helps in establishing new business partnerships.
From: 27 February 2018
To: 01 March 2018
For years now the embedded world Conference has been the equivalent of a transfer of knowledge par excellence, as the meeting place of the most innovative embedded systems developers from all over the world, and at the same time the biggest European conference devoted to embedded systems development.
This year of embedded world Conference will be held in Nuremberg, Germany, from February 27th to March 1st, 2018.
Keynote speakers for 2018 are confirmed and one of them is Simon Chudoba, CEO of the IQRF Alliance. Mr. Chudoba will talk about "How to Realize an IoT Project Effectively". Come and listen to his presentation on February 28th, 2018.
When: Feb 27th - Mar 1st, 2018
From: 01 February 2018
To: 01 February 2018
When: Thursday, February 1st, 2018
9:00 - 11:00 Theoretical part
12:00 - 15:00 Practical workshop
Registration: until January 20th, 2018 - here
In the first part of the seminar, IoT experts will teach students more about all the components and devices of the IoT ecosystem and then under their leadership students will be able to practically test all components.
Students will learn more about the IQRF technology, set up UP board for cloud connectivity, and try creating a dashboard using Node-RED.
Please apply for registration because the classroom capacity is limited.
All registered students will receive a confirmation e-mail.
From: 01 February 2018
To: 01 February 2018
Your positive feedback on the last Meetup made the IQRF Alliance to prepare another Meetup, now in Prague. Once again the meetup is aimed at Czech and Slovak members of the IQRF Alliance and IQRF technology enthusiasts.
The program will be very similar to the first meetup. During a networking dinner, guests will present their progress with devices based on the IQRF wireless technology, learn the latest news around the IQRF and have an opportunity to network with other members or IQRF enthusiasts.
Moreover, the main topic will be the IQRF Summit 2018. The participants will get detailed information on the IQRF Summit 2018 and tips how to prepare their presentations.
Where: Potrefená Husa (Resslova 1, Praha)
When: 1. 2. 2018, 16:00 - 22:00
Accommodation: IQRF Alliance Team will stay at Caesar Prague Hotel