Savee Power Switch
The relay power switch of the Savee smart light control solution
Name: NIKATRON s.r.o.
Street: Dornych 54 / 47
Country: Czech Republic
Info about product
Category: end devices
Manufacturer Name: NIKATRON s.r.o.
HWPID: -1 (0xffffffffffffffff)
Power Supply: 110/230 V AC, 50/60 Hz
Manuf. Location: Czech Republic
The Savee Power Switch is a kit designed for wireless switching of devices remotely, such as controlling lights, blinds, lowering the screen after turning on the projector, or starting the extractor fan when turning on the saw or grinder in the workshop.
Both ends (GW and Power Switch) communicate using an IQRF wireless mesh network. The kit can be used for integrating into existing buildings and installations. We call it retrofit and you can do it "overnight" without limiting the operation of the building.
The Savee Power Switch is a part of the Savee light control solution and can't be purchased separately.
|Power voltage||110/230 V AC, 50/60 Hz|
|Maximum switching current||8/15 A|
|Communication band||868 MHz|
|Communication protocol||IQRF Mesh|
|Radiated power||12 dBm|
|Operating temperature range||-10°C to 55°C|
|Ingress protection code||IP40|
|Dimensions||82 x 82 x 28 mm|
Room sensor NLII-RH is used to monitor the air quality inside…
Wireless Power IO board with relays and temperature sensor, LED…
4IOT-SEN-01 is a device designed for automated measurement of…
Combined sensor NLII-TVOC/RH is used to monitor air quality inside…